#compdef rustup

autoload -U is-at-least

_rustup() {
    typeset -A opt_args
    typeset -a _arguments_options
    local ret=1

    if is-at-least 5.2; then
        _arguments_options=(-s -S -C)
    else
        _arguments_options=(-s -C)
    fi

    local context curcontext="$curcontext" state line
    _arguments "${_arguments_options[@]}" \
'-v[Enable verbose output]' \
'--verbose[Enable verbose output]' \
'(-v --verbose)-q[Disable progress output]' \
'(-v --verbose)--quiet[Disable progress output]' \
'-h[Print help]' \
'--help[Print help]' \
'-V[Print version]' \
'--version[Print version]' \
'::+toolchain -- release channel (e.g. +stable) or custom toolchain to set override:' \
":: :_rustup_commands" \
"*::: :->rustup" \
&& ret=0
    case $state in
    (rustup)
        words=($line[2] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-command-$line[2]:"
        case $line[2] in
            (dump-testament)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(show)
_arguments "${_arguments_options[@]}" \
'-v[Enable verbose output with rustc information for all installed toolchains]' \
'--verbose[Enable verbose output with rustc information for all installed toolchains]' \
'-h[Print help]' \
'--help[Print help]' \
":: :_rustup__show_commands" \
"*::: :->show" \
&& ret=0

    case $state in
    (show)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-show-command-$line[1]:"
        case $line[1] in
            (active-toolchain)
_arguments "${_arguments_options[@]}" \
'-v[Enable verbose output with rustc information]' \
'--verbose[Enable verbose output with rustc information]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(home)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(profile)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
":: :_rustup__show__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-show-help-command-$line[1]:"
        case $line[1] in
            (active-toolchain)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(home)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(profile)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
;;
(install)
_arguments "${_arguments_options[@]}" \
'--profile=[]: :(minimal default complete)' \
'--no-self-update[Don'\''t perform self-update when running the \`rustup install\` command]' \
'--force[Force an update, even if some components are missing]' \
'--force-non-host[Install toolchains that require an emulator. See https\://github.com/rust-lang/rustup/wiki/Non-host-toolchains]' \
'-h[Print help]' \
'--help[Print help]' \
'*::toolchain -- Toolchain name, such as '\''stable'\'', '\''nightly'\'', or '\''1.8.0'\''. For more information see `rustup help toolchain`:' \
&& ret=0
;;
(uninstall)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
'*::toolchain -- Toolchain name, such as '\''stable'\'', '\''nightly'\'', '\''1.8.0'\'', or a custom toolchain name. For more information see `rustup help toolchain`:' \
&& ret=0
;;
(update)
_arguments "${_arguments_options[@]}" \
'--no-self-update[Don'\''t perform self update when running the \`rustup update\` command]' \
'--force[Force an update, even if some components are missing]' \
'--force-non-host[Install toolchains that require an emulator. See https\://github.com/rust-lang/rustup/wiki/Non-host-toolchains]' \
'-h[Print help]' \
'--help[Print help]' \
'*::toolchain -- Toolchain name, such as '\''stable'\'', '\''nightly'\'', or '\''1.8.0'\''. For more information see `rustup help toolchain`:' \
&& ret=0
;;
(check)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(default)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
'::toolchain -- '\''none'\'', a toolchain name, such as '\''stable'\'', '\''nightly'\'', '\''1.8.0'\'', or a custom toolchain name. For more information see `rustup help toolchain`:' \
&& ret=0
;;
(toolchain)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
":: :_rustup__toolchain_commands" \
"*::: :->toolchain" \
&& ret=0

    case $state in
    (toolchain)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-toolchain-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
'-v[Enable verbose output with toolchain information]' \
'--verbose[Enable verbose output with toolchain information]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(install)
_arguments "${_arguments_options[@]}" \
'--profile=[]: :(minimal default complete)' \
'*-c+[Add specific components on installation]: : ' \
'*--component=[Add specific components on installation]: : ' \
'*-t+[Add specific targets on installation]: : ' \
'*--target=[Add specific targets on installation]: : ' \
'--no-self-update[Don'\''t perform self update when running the\`rustup toolchain install\` command]' \
'--force[Force an update, even if some components are missing]' \
'--allow-downgrade[Allow rustup to downgrade the toolchain to satisfy your component choice]' \
'--force-non-host[Install toolchains that require an emulator. See https\://github.com/rust-lang/rustup/wiki/Non-host-toolchains]' \
'-h[Print help]' \
'--help[Print help]' \
'*::toolchain -- Toolchain name, such as '\''stable'\'', '\''nightly'\'', or '\''1.8.0'\''. For more information see `rustup help toolchain`:' \
&& ret=0
;;
(uninstall)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
'*::toolchain -- Toolchain name, such as '\''stable'\'', '\''nightly'\'', '\''1.8.0'\'', or a custom toolchain name. For more information see `rustup help toolchain`:' \
&& ret=0
;;
(link)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
':toolchain -- Custom toolchain name:' \
':path -- Path to the directory:' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
":: :_rustup__toolchain__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-toolchain-help-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(install)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(uninstall)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(link)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
;;
(target)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
":: :_rustup__target_commands" \
"*::: :->target" \
&& ret=0

    case $state in
    (target)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-target-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
'--toolchain=[Toolchain name, such as '\''stable'\'', '\''nightly'\'', or '\''1.8.0'\''. For more information see \`rustup help toolchain\`]: : ' \
'--installed[List only installed targets]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(add)
_arguments "${_arguments_options[@]}" \
'--toolchain=[Toolchain name, such as '\''stable'\'', '\''nightly'\'', or '\''1.8.0'\''. For more information see \`rustup help toolchain\`]: : ' \
'-h[Print help]' \
'--help[Print help]' \
'*::target -- List of targets to install; "all" installs all available targets:' \
&& ret=0
;;
(remove)
_arguments "${_arguments_options[@]}" \
'--toolchain=[Toolchain name, such as '\''stable'\'', '\''nightly'\'', or '\''1.8.0'\''. For more information see \`rustup help toolchain\`]: : ' \
'-h[Print help]' \
'--help[Print help]' \
'*::target -- List of targets to uninstall:' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
":: :_rustup__target__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-target-help-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(add)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(remove)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
;;
(component)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
":: :_rustup__component_commands" \
"*::: :->component" \
&& ret=0

    case $state in
    (component)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-component-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
'--toolchain=[Toolchain name, such as '\''stable'\'', '\''nightly'\'', or '\''1.8.0'\''. For more information see \`rustup help toolchain\`]: : ' \
'--installed[List only installed components]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(add)
_arguments "${_arguments_options[@]}" \
'--toolchain=[Toolchain name, such as '\''stable'\'', '\''nightly'\'', or '\''1.8.0'\''. For more information see \`rustup help toolchain\`]: : ' \
'--target=[]: : ' \
'-h[Print help]' \
'--help[Print help]' \
'*::component:' \
&& ret=0
;;
(remove)
_arguments "${_arguments_options[@]}" \
'--toolchain=[Toolchain name, such as '\''stable'\'', '\''nightly'\'', or '\''1.8.0'\''. For more information see \`rustup help toolchain\`]: : ' \
'--target=[]: : ' \
'-h[Print help]' \
'--help[Print help]' \
'*::component:' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
":: :_rustup__component__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-component-help-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(add)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(remove)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
;;
(override)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
":: :_rustup__override_commands" \
"*::: :->override" \
&& ret=0

    case $state in
    (override)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-override-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(set)
_arguments "${_arguments_options[@]}" \
'--path=[Path to the directory]: : ' \
'-h[Print help]' \
'--help[Print help]' \
':toolchain -- Toolchain name, such as '\''stable'\'', '\''nightly'\'', '\''1.8.0'\'', or a custom toolchain name. For more information see `rustup help toolchain`:' \
&& ret=0
;;
(unset)
_arguments "${_arguments_options[@]}" \
'--path=[Path to the directory]: : ' \
'--nonexistent[Remove override toolchain for all nonexistent directories]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
":: :_rustup__override__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-override-help-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(set)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(unset)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
;;
(run)
_arguments "${_arguments_options[@]}" \
'--install[Install the requested toolchain if needed]' \
'-h[Print help]' \
'--help[Print help]' \
':toolchain -- Toolchain name, such as '\''stable'\'', '\''nightly'\'', '\''1.8.0'\'', or a custom toolchain name, or an absolute path. For more information see `rustup help toolchain`:' \
'*::command:' \
&& ret=0
;;
(which)
_arguments "${_arguments_options[@]}" \
'--toolchain=[Toolchain name, such as '\''stable'\'', '\''nightly'\'', '\''1.8.0'\'', or a custom toolchain name. For more information see \`rustup help toolchain\`]: : ' \
'-h[Print help]' \
'--help[Print help]' \
':command:' \
&& ret=0
;;
(doc)
_arguments "${_arguments_options[@]}" \
'--toolchain=[Toolchain name, such as '\''stable'\'', '\''nightly'\'', or '\''1.8.0'\''. For more information see \`rustup help toolchain\`]: : ' \
'--path[Only print the path to the documentation]' \
'--alloc[The Rust core allocation and collections library]' \
'--book[The Rust Programming Language book]' \
'--cargo[The Cargo Book]' \
'--core[The Rust Core Library]' \
'--edition-guide[The Rust Edition Guide]' \
'--nomicon[The Dark Arts of Advanced and Unsafe Rust Programming]' \
'--proc_macro[A support library for macro authors when defining new macros]' \
'--reference[The Rust Reference]' \
'--rust-by-example[A collection of runnable examples that illustrate various Rust concepts and standard libraries]' \
'--rustc[The compiler for the Rust programming language]' \
'--rustdoc[Documentation generator for Rust projects]' \
'--std[Standard library API documentation]' \
'--test[Support code for rustc'\''s built in unit-test and micro-benchmarking framework]' \
'--unstable-book[The Unstable Book]' \
'--embedded-book[The Embedded Rust Book]' \
'-h[Print help]' \
'--help[Print help]' \
'::topic -- Topic such as '\''core'\'', '\''fn'\'', '\''usize'\'', '\''eprintln!'\'', '\''core\:\:arch'\'', '\''alloc\:\:format!'\'', '\''std\:\:fs'\'', '\''std\:\:fs\:\:read_dir'\'', '\''std\:\:io\:\:Bytes'\'', '\''std\:\:iter\:\:Sum'\'', '\''std\:\:io\:\:error\:\:Result'\'' etc...:' \
&& ret=0
;;
(man)
_arguments "${_arguments_options[@]}" \
'--toolchain=[Toolchain name, such as '\''stable'\'', '\''nightly'\'', or '\''1.8.0'\''. For more information see \`rustup help toolchain\`]: : ' \
'-h[Print help]' \
'--help[Print help]' \
':command:' \
&& ret=0
;;
(self)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
":: :_rustup__self_commands" \
"*::: :->self" \
&& ret=0

    case $state in
    (self)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-self-command-$line[1]:"
        case $line[1] in
            (update)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(uninstall)
_arguments "${_arguments_options[@]}" \
'-y[]' \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(upgrade-data)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
":: :_rustup__self__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-self-help-command-$line[1]:"
        case $line[1] in
            (update)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(uninstall)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(upgrade-data)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
;;
(set)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
":: :_rustup__set_commands" \
"*::: :->set" \
&& ret=0

    case $state in
    (set)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-set-command-$line[1]:"
        case $line[1] in
            (default-host)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
':host_triple:' \
&& ret=0
;;
(profile)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
':profile-name:(minimal default complete)' \
&& ret=0
;;
(auto-self-update)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
':auto-self-update-mode:(enable disable check-only)' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
":: :_rustup__set__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-set-help-command-$line[1]:"
        case $line[1] in
            (default-host)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(profile)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(auto-self-update)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
;;
(completions)
_arguments "${_arguments_options[@]}" \
'-h[Print help]' \
'--help[Print help]' \
'::shell:(bash elvish fish powershell zsh)' \
'::command:(rustup cargo)' \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
":: :_rustup__help_commands" \
"*::: :->help" \
&& ret=0

    case $state in
    (help)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-help-command-$line[1]:"
        case $line[1] in
            (dump-testament)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(show)
_arguments "${_arguments_options[@]}" \
":: :_rustup__help__show_commands" \
"*::: :->show" \
&& ret=0

    case $state in
    (show)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-help-show-command-$line[1]:"
        case $line[1] in
            (active-toolchain)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(home)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(profile)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
(install)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(uninstall)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(update)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(check)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(default)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(toolchain)
_arguments "${_arguments_options[@]}" \
":: :_rustup__help__toolchain_commands" \
"*::: :->toolchain" \
&& ret=0

    case $state in
    (toolchain)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-help-toolchain-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(install)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(uninstall)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(link)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
(target)
_arguments "${_arguments_options[@]}" \
":: :_rustup__help__target_commands" \
"*::: :->target" \
&& ret=0

    case $state in
    (target)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-help-target-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(add)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(remove)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
(component)
_arguments "${_arguments_options[@]}" \
":: :_rustup__help__component_commands" \
"*::: :->component" \
&& ret=0

    case $state in
    (component)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-help-component-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(add)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(remove)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
(override)
_arguments "${_arguments_options[@]}" \
":: :_rustup__help__override_commands" \
"*::: :->override" \
&& ret=0

    case $state in
    (override)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-help-override-command-$line[1]:"
        case $line[1] in
            (list)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(set)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(unset)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
(run)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(which)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(doc)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(man)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(self)
_arguments "${_arguments_options[@]}" \
":: :_rustup__help__self_commands" \
"*::: :->self" \
&& ret=0

    case $state in
    (self)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-help-self-command-$line[1]:"
        case $line[1] in
            (update)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(uninstall)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(upgrade-data)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
(set)
_arguments "${_arguments_options[@]}" \
":: :_rustup__help__set_commands" \
"*::: :->set" \
&& ret=0

    case $state in
    (set)
        words=($line[1] "${words[@]}")
        (( CURRENT += 1 ))
        curcontext="${curcontext%:*:*}:rustup-help-set-command-$line[1]:"
        case $line[1] in
            (default-host)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(profile)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(auto-self-update)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
(completions)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
(help)
_arguments "${_arguments_options[@]}" \
&& ret=0
;;
        esac
    ;;
esac
;;
        esac
    ;;
esac
}

(( $+functions[_rustup_commands] )) ||
_rustup_commands() {
    local commands; commands=(
'dump-testament:Dump information about the build' \
'show:Show the active and installed toolchains or profiles' \
'install:Update Rust toolchains' \
'uninstall:Uninstall Rust toolchains' \
'update:Update Rust toolchains and rustup' \
'check:Check for updates to Rust toolchains and rustup' \
'default:Set the default toolchain' \
'toolchain:Modify or query the installed toolchains' \
'target:Modify a toolchain'\''s supported targets' \
'component:Modify a toolchain'\''s installed components' \
'override:Modify toolchain overrides for directories' \
'run:Run a command with an environment configured for a given toolchain' \
'which:Display which binary will be run for a given command' \
'doc:Open the documentation for the current toolchain' \
'man:View the man page for a given command' \
'self:Modify the rustup installation' \
'set:Alter rustup settings' \
'completions:Generate tab-completion scripts for your shell' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup commands' commands "$@"
}
(( $+functions[_rustup__help__show__active-toolchain_commands] )) ||
_rustup__help__show__active-toolchain_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help show active-toolchain commands' commands "$@"
}
(( $+functions[_rustup__show__active-toolchain_commands] )) ||
_rustup__show__active-toolchain_commands() {
    local commands; commands=()
    _describe -t commands 'rustup show active-toolchain commands' commands "$@"
}
(( $+functions[_rustup__show__help__active-toolchain_commands] )) ||
_rustup__show__help__active-toolchain_commands() {
    local commands; commands=()
    _describe -t commands 'rustup show help active-toolchain commands' commands "$@"
}
(( $+functions[_rustup__component__add_commands] )) ||
_rustup__component__add_commands() {
    local commands; commands=()
    _describe -t commands 'rustup component add commands' commands "$@"
}
(( $+functions[_rustup__component__help__add_commands] )) ||
_rustup__component__help__add_commands() {
    local commands; commands=()
    _describe -t commands 'rustup component help add commands' commands "$@"
}
(( $+functions[_rustup__help__component__add_commands] )) ||
_rustup__help__component__add_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help component add commands' commands "$@"
}
(( $+functions[_rustup__help__target__add_commands] )) ||
_rustup__help__target__add_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help target add commands' commands "$@"
}
(( $+functions[_rustup__target__add_commands] )) ||
_rustup__target__add_commands() {
    local commands; commands=()
    _describe -t commands 'rustup target add commands' commands "$@"
}
(( $+functions[_rustup__target__help__add_commands] )) ||
_rustup__target__help__add_commands() {
    local commands; commands=()
    _describe -t commands 'rustup target help add commands' commands "$@"
}
(( $+functions[_rustup__help__set__auto-self-update_commands] )) ||
_rustup__help__set__auto-self-update_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help set auto-self-update commands' commands "$@"
}
(( $+functions[_rustup__set__auto-self-update_commands] )) ||
_rustup__set__auto-self-update_commands() {
    local commands; commands=()
    _describe -t commands 'rustup set auto-self-update commands' commands "$@"
}
(( $+functions[_rustup__set__help__auto-self-update_commands] )) ||
_rustup__set__help__auto-self-update_commands() {
    local commands; commands=()
    _describe -t commands 'rustup set help auto-self-update commands' commands "$@"
}
(( $+functions[_rustup__check_commands] )) ||
_rustup__check_commands() {
    local commands; commands=()
    _describe -t commands 'rustup check commands' commands "$@"
}
(( $+functions[_rustup__help__check_commands] )) ||
_rustup__help__check_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help check commands' commands "$@"
}
(( $+functions[_rustup__completions_commands] )) ||
_rustup__completions_commands() {
    local commands; commands=()
    _describe -t commands 'rustup completions commands' commands "$@"
}
(( $+functions[_rustup__help__completions_commands] )) ||
_rustup__help__completions_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help completions commands' commands "$@"
}
(( $+functions[_rustup__component_commands] )) ||
_rustup__component_commands() {
    local commands; commands=(
'list:List installed and available components' \
'add:Add a component to a Rust toolchain' \
'remove:Remove a component from a Rust toolchain' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup component commands' commands "$@"
}
(( $+functions[_rustup__help__component_commands] )) ||
_rustup__help__component_commands() {
    local commands; commands=(
'list:List installed and available components' \
'add:Add a component to a Rust toolchain' \
'remove:Remove a component from a Rust toolchain' \
    )
    _describe -t commands 'rustup help component commands' commands "$@"
}
(( $+functions[_rustup__default_commands] )) ||
_rustup__default_commands() {
    local commands; commands=()
    _describe -t commands 'rustup default commands' commands "$@"
}
(( $+functions[_rustup__help__default_commands] )) ||
_rustup__help__default_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help default commands' commands "$@"
}
(( $+functions[_rustup__help__set__default-host_commands] )) ||
_rustup__help__set__default-host_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help set default-host commands' commands "$@"
}
(( $+functions[_rustup__set__default-host_commands] )) ||
_rustup__set__default-host_commands() {
    local commands; commands=()
    _describe -t commands 'rustup set default-host commands' commands "$@"
}
(( $+functions[_rustup__set__help__default-host_commands] )) ||
_rustup__set__help__default-host_commands() {
    local commands; commands=()
    _describe -t commands 'rustup set help default-host commands' commands "$@"
}
(( $+functions[_rustup__doc_commands] )) ||
_rustup__doc_commands() {
    local commands; commands=()
    _describe -t commands 'rustup doc commands' commands "$@"
}
(( $+functions[_rustup__help__doc_commands] )) ||
_rustup__help__doc_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help doc commands' commands "$@"
}
(( $+functions[_rustup__dump-testament_commands] )) ||
_rustup__dump-testament_commands() {
    local commands; commands=()
    _describe -t commands 'rustup dump-testament commands' commands "$@"
}
(( $+functions[_rustup__help__dump-testament_commands] )) ||
_rustup__help__dump-testament_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help dump-testament commands' commands "$@"
}
(( $+functions[_rustup__component__help_commands] )) ||
_rustup__component__help_commands() {
    local commands; commands=(
'list:List installed and available components' \
'add:Add a component to a Rust toolchain' \
'remove:Remove a component from a Rust toolchain' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup component help commands' commands "$@"
}
(( $+functions[_rustup__component__help__help_commands] )) ||
_rustup__component__help__help_commands() {
    local commands; commands=()
    _describe -t commands 'rustup component help help commands' commands "$@"
}
(( $+functions[_rustup__help_commands] )) ||
_rustup__help_commands() {
    local commands; commands=(
'dump-testament:Dump information about the build' \
'show:Show the active and installed toolchains or profiles' \
'install:Update Rust toolchains' \
'uninstall:Uninstall Rust toolchains' \
'update:Update Rust toolchains and rustup' \
'check:Check for updates to Rust toolchains and rustup' \
'default:Set the default toolchain' \
'toolchain:Modify or query the installed toolchains' \
'target:Modify a toolchain'\''s supported targets' \
'component:Modify a toolchain'\''s installed components' \
'override:Modify toolchain overrides for directories' \
'run:Run a command with an environment configured for a given toolchain' \
'which:Display which binary will be run for a given command' \
'doc:Open the documentation for the current toolchain' \
'man:View the man page for a given command' \
'self:Modify the rustup installation' \
'set:Alter rustup settings' \
'completions:Generate tab-completion scripts for your shell' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup help commands' commands "$@"
}
(( $+functions[_rustup__help__help_commands] )) ||
_rustup__help__help_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help help commands' commands "$@"
}
(( $+functions[_rustup__override__help_commands] )) ||
_rustup__override__help_commands() {
    local commands; commands=(
'list:List directory toolchain overrides' \
'set:Set the override toolchain for a directory' \
'unset:Remove the override toolchain for a directory' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup override help commands' commands "$@"
}
(( $+functions[_rustup__override__help__help_commands] )) ||
_rustup__override__help__help_commands() {
    local commands; commands=()
    _describe -t commands 'rustup override help help commands' commands "$@"
}
(( $+functions[_rustup__self__help_commands] )) ||
_rustup__self__help_commands() {
    local commands; commands=(
'update:Download and install updates to rustup' \
'uninstall:Uninstall rustup.' \
'upgrade-data:Upgrade the internal data format.' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup self help commands' commands "$@"
}
(( $+functions[_rustup__self__help__help_commands] )) ||
_rustup__self__help__help_commands() {
    local commands; commands=()
    _describe -t commands 'rustup self help help commands' commands "$@"
}
(( $+functions[_rustup__set__help_commands] )) ||
_rustup__set__help_commands() {
    local commands; commands=(
'default-host:The triple used to identify toolchains when not specified' \
'profile:The default components installed with a toolchain' \
'auto-self-update:The rustup auto self update mode' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup set help commands' commands "$@"
}
(( $+functions[_rustup__set__help__help_commands] )) ||
_rustup__set__help__help_commands() {
    local commands; commands=()
    _describe -t commands 'rustup set help help commands' commands "$@"
}
(( $+functions[_rustup__show__help_commands] )) ||
_rustup__show__help_commands() {
    local commands; commands=(
'active-toolchain:Show the active toolchain' \
'home:Display the computed value of RUSTUP_HOME' \
'profile:Show the default profile used for the \`rustup install\` command' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup show help commands' commands "$@"
}
(( $+functions[_rustup__show__help__help_commands] )) ||
_rustup__show__help__help_commands() {
    local commands; commands=()
    _describe -t commands 'rustup show help help commands' commands "$@"
}
(( $+functions[_rustup__target__help_commands] )) ||
_rustup__target__help_commands() {
    local commands; commands=(
'list:List installed and available targets' \
'add:Add a target to a Rust toolchain' \
'remove:Remove a target from a Rust toolchain' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup target help commands' commands "$@"
}
(( $+functions[_rustup__target__help__help_commands] )) ||
_rustup__target__help__help_commands() {
    local commands; commands=()
    _describe -t commands 'rustup target help help commands' commands "$@"
}
(( $+functions[_rustup__toolchain__help_commands] )) ||
_rustup__toolchain__help_commands() {
    local commands; commands=(
'list:List installed toolchains' \
'install:Install or update a given toolchain' \
'uninstall:Uninstall a toolchain' \
'link:Create a custom toolchain by symlinking to a directory' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup toolchain help commands' commands "$@"
}
(( $+functions[_rustup__toolchain__help__help_commands] )) ||
_rustup__toolchain__help__help_commands() {
    local commands; commands=()
    _describe -t commands 'rustup toolchain help help commands' commands "$@"
}
(( $+functions[_rustup__help__show__home_commands] )) ||
_rustup__help__show__home_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help show home commands' commands "$@"
}
(( $+functions[_rustup__show__help__home_commands] )) ||
_rustup__show__help__home_commands() {
    local commands; commands=()
    _describe -t commands 'rustup show help home commands' commands "$@"
}
(( $+functions[_rustup__show__home_commands] )) ||
_rustup__show__home_commands() {
    local commands; commands=()
    _describe -t commands 'rustup show home commands' commands "$@"
}
(( $+functions[_rustup__help__install_commands] )) ||
_rustup__help__install_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help install commands' commands "$@"
}
(( $+functions[_rustup__help__toolchain__install_commands] )) ||
_rustup__help__toolchain__install_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help toolchain install commands' commands "$@"
}
(( $+functions[_rustup__install_commands] )) ||
_rustup__install_commands() {
    local commands; commands=()
    _describe -t commands 'rustup install commands' commands "$@"
}
(( $+functions[_rustup__toolchain__help__install_commands] )) ||
_rustup__toolchain__help__install_commands() {
    local commands; commands=()
    _describe -t commands 'rustup toolchain help install commands' commands "$@"
}
(( $+functions[_rustup__toolchain__install_commands] )) ||
_rustup__toolchain__install_commands() {
    local commands; commands=()
    _describe -t commands 'rustup toolchain install commands' commands "$@"
}
(( $+functions[_rustup__help__toolchain__link_commands] )) ||
_rustup__help__toolchain__link_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help toolchain link commands' commands "$@"
}
(( $+functions[_rustup__toolchain__help__link_commands] )) ||
_rustup__toolchain__help__link_commands() {
    local commands; commands=()
    _describe -t commands 'rustup toolchain help link commands' commands "$@"
}
(( $+functions[_rustup__toolchain__link_commands] )) ||
_rustup__toolchain__link_commands() {
    local commands; commands=()
    _describe -t commands 'rustup toolchain link commands' commands "$@"
}
(( $+functions[_rustup__component__help__list_commands] )) ||
_rustup__component__help__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup component help list commands' commands "$@"
}
(( $+functions[_rustup__component__list_commands] )) ||
_rustup__component__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup component list commands' commands "$@"
}
(( $+functions[_rustup__help__component__list_commands] )) ||
_rustup__help__component__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help component list commands' commands "$@"
}
(( $+functions[_rustup__help__override__list_commands] )) ||
_rustup__help__override__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help override list commands' commands "$@"
}
(( $+functions[_rustup__help__target__list_commands] )) ||
_rustup__help__target__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help target list commands' commands "$@"
}
(( $+functions[_rustup__help__toolchain__list_commands] )) ||
_rustup__help__toolchain__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help toolchain list commands' commands "$@"
}
(( $+functions[_rustup__override__help__list_commands] )) ||
_rustup__override__help__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup override help list commands' commands "$@"
}
(( $+functions[_rustup__override__list_commands] )) ||
_rustup__override__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup override list commands' commands "$@"
}
(( $+functions[_rustup__target__help__list_commands] )) ||
_rustup__target__help__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup target help list commands' commands "$@"
}
(( $+functions[_rustup__target__list_commands] )) ||
_rustup__target__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup target list commands' commands "$@"
}
(( $+functions[_rustup__toolchain__help__list_commands] )) ||
_rustup__toolchain__help__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup toolchain help list commands' commands "$@"
}
(( $+functions[_rustup__toolchain__list_commands] )) ||
_rustup__toolchain__list_commands() {
    local commands; commands=()
    _describe -t commands 'rustup toolchain list commands' commands "$@"
}
(( $+functions[_rustup__help__man_commands] )) ||
_rustup__help__man_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help man commands' commands "$@"
}
(( $+functions[_rustup__man_commands] )) ||
_rustup__man_commands() {
    local commands; commands=()
    _describe -t commands 'rustup man commands' commands "$@"
}
(( $+functions[_rustup__help__override_commands] )) ||
_rustup__help__override_commands() {
    local commands; commands=(
'list:List directory toolchain overrides' \
'set:Set the override toolchain for a directory' \
'unset:Remove the override toolchain for a directory' \
    )
    _describe -t commands 'rustup help override commands' commands "$@"
}
(( $+functions[_rustup__override_commands] )) ||
_rustup__override_commands() {
    local commands; commands=(
'list:List directory toolchain overrides' \
'set:Set the override toolchain for a directory' \
'unset:Remove the override toolchain for a directory' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup override commands' commands "$@"
}
(( $+functions[_rustup__help__set__profile_commands] )) ||
_rustup__help__set__profile_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help set profile commands' commands "$@"
}
(( $+functions[_rustup__help__show__profile_commands] )) ||
_rustup__help__show__profile_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help show profile commands' commands "$@"
}
(( $+functions[_rustup__set__help__profile_commands] )) ||
_rustup__set__help__profile_commands() {
    local commands; commands=()
    _describe -t commands 'rustup set help profile commands' commands "$@"
}
(( $+functions[_rustup__set__profile_commands] )) ||
_rustup__set__profile_commands() {
    local commands; commands=()
    _describe -t commands 'rustup set profile commands' commands "$@"
}
(( $+functions[_rustup__show__help__profile_commands] )) ||
_rustup__show__help__profile_commands() {
    local commands; commands=()
    _describe -t commands 'rustup show help profile commands' commands "$@"
}
(( $+functions[_rustup__show__profile_commands] )) ||
_rustup__show__profile_commands() {
    local commands; commands=()
    _describe -t commands 'rustup show profile commands' commands "$@"
}
(( $+functions[_rustup__component__help__remove_commands] )) ||
_rustup__component__help__remove_commands() {
    local commands; commands=()
    _describe -t commands 'rustup component help remove commands' commands "$@"
}
(( $+functions[_rustup__component__remove_commands] )) ||
_rustup__component__remove_commands() {
    local commands; commands=()
    _describe -t commands 'rustup component remove commands' commands "$@"
}
(( $+functions[_rustup__help__component__remove_commands] )) ||
_rustup__help__component__remove_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help component remove commands' commands "$@"
}
(( $+functions[_rustup__help__target__remove_commands] )) ||
_rustup__help__target__remove_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help target remove commands' commands "$@"
}
(( $+functions[_rustup__target__help__remove_commands] )) ||
_rustup__target__help__remove_commands() {
    local commands; commands=()
    _describe -t commands 'rustup target help remove commands' commands "$@"
}
(( $+functions[_rustup__target__remove_commands] )) ||
_rustup__target__remove_commands() {
    local commands; commands=()
    _describe -t commands 'rustup target remove commands' commands "$@"
}
(( $+functions[_rustup__help__run_commands] )) ||
_rustup__help__run_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help run commands' commands "$@"
}
(( $+functions[_rustup__run_commands] )) ||
_rustup__run_commands() {
    local commands; commands=()
    _describe -t commands 'rustup run commands' commands "$@"
}
(( $+functions[_rustup__help__self_commands] )) ||
_rustup__help__self_commands() {
    local commands; commands=(
'update:Download and install updates to rustup' \
'uninstall:Uninstall rustup.' \
'upgrade-data:Upgrade the internal data format.' \
    )
    _describe -t commands 'rustup help self commands' commands "$@"
}
(( $+functions[_rustup__self_commands] )) ||
_rustup__self_commands() {
    local commands; commands=(
'update:Download and install updates to rustup' \
'uninstall:Uninstall rustup.' \
'upgrade-data:Upgrade the internal data format.' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup self commands' commands "$@"
}
(( $+functions[_rustup__help__override__set_commands] )) ||
_rustup__help__override__set_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help override set commands' commands "$@"
}
(( $+functions[_rustup__help__set_commands] )) ||
_rustup__help__set_commands() {
    local commands; commands=(
'default-host:The triple used to identify toolchains when not specified' \
'profile:The default components installed with a toolchain' \
'auto-self-update:The rustup auto self update mode' \
    )
    _describe -t commands 'rustup help set commands' commands "$@"
}
(( $+functions[_rustup__override__help__set_commands] )) ||
_rustup__override__help__set_commands() {
    local commands; commands=()
    _describe -t commands 'rustup override help set commands' commands "$@"
}
(( $+functions[_rustup__override__set_commands] )) ||
_rustup__override__set_commands() {
    local commands; commands=()
    _describe -t commands 'rustup override set commands' commands "$@"
}
(( $+functions[_rustup__set_commands] )) ||
_rustup__set_commands() {
    local commands; commands=(
'default-host:The triple used to identify toolchains when not specified' \
'profile:The default components installed with a toolchain' \
'auto-self-update:The rustup auto self update mode' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup set commands' commands "$@"
}
(( $+functions[_rustup__help__show_commands] )) ||
_rustup__help__show_commands() {
    local commands; commands=(
'active-toolchain:Show the active toolchain' \
'home:Display the computed value of RUSTUP_HOME' \
'profile:Show the default profile used for the \`rustup install\` command' \
    )
    _describe -t commands 'rustup help show commands' commands "$@"
}
(( $+functions[_rustup__show_commands] )) ||
_rustup__show_commands() {
    local commands; commands=(
'active-toolchain:Show the active toolchain' \
'home:Display the computed value of RUSTUP_HOME' \
'profile:Show the default profile used for the \`rustup install\` command' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup show commands' commands "$@"
}
(( $+functions[_rustup__help__target_commands] )) ||
_rustup__help__target_commands() {
    local commands; commands=(
'list:List installed and available targets' \
'add:Add a target to a Rust toolchain' \
'remove:Remove a target from a Rust toolchain' \
    )
    _describe -t commands 'rustup help target commands' commands "$@"
}
(( $+functions[_rustup__target_commands] )) ||
_rustup__target_commands() {
    local commands; commands=(
'list:List installed and available targets' \
'add:Add a target to a Rust toolchain' \
'remove:Remove a target from a Rust toolchain' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup target commands' commands "$@"
}
(( $+functions[_rustup__help__toolchain_commands] )) ||
_rustup__help__toolchain_commands() {
    local commands; commands=(
'list:List installed toolchains' \
'install:Install or update a given toolchain' \
'uninstall:Uninstall a toolchain' \
'link:Create a custom toolchain by symlinking to a directory' \
    )
    _describe -t commands 'rustup help toolchain commands' commands "$@"
}
(( $+functions[_rustup__toolchain_commands] )) ||
_rustup__toolchain_commands() {
    local commands; commands=(
'list:List installed toolchains' \
'install:Install or update a given toolchain' \
'uninstall:Uninstall a toolchain' \
'link:Create a custom toolchain by symlinking to a directory' \
'help:Print this message or the help of the given subcommand(s)' \
    )
    _describe -t commands 'rustup toolchain commands' commands "$@"
}
(( $+functions[_rustup__help__self__uninstall_commands] )) ||
_rustup__help__self__uninstall_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help self uninstall commands' commands "$@"
}
(( $+functions[_rustup__help__toolchain__uninstall_commands] )) ||
_rustup__help__toolchain__uninstall_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help toolchain uninstall commands' commands "$@"
}
(( $+functions[_rustup__help__uninstall_commands] )) ||
_rustup__help__uninstall_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help uninstall commands' commands "$@"
}
(( $+functions[_rustup__self__help__uninstall_commands] )) ||
_rustup__self__help__uninstall_commands() {
    local commands; commands=()
    _describe -t commands 'rustup self help uninstall commands' commands "$@"
}
(( $+functions[_rustup__self__uninstall_commands] )) ||
_rustup__self__uninstall_commands() {
    local commands; commands=()
    _describe -t commands 'rustup self uninstall commands' commands "$@"
}
(( $+functions[_rustup__toolchain__help__uninstall_commands] )) ||
_rustup__toolchain__help__uninstall_commands() {
    local commands; commands=()
    _describe -t commands 'rustup toolchain help uninstall commands' commands "$@"
}
(( $+functions[_rustup__toolchain__uninstall_commands] )) ||
_rustup__toolchain__uninstall_commands() {
    local commands; commands=()
    _describe -t commands 'rustup toolchain uninstall commands' commands "$@"
}
(( $+functions[_rustup__uninstall_commands] )) ||
_rustup__uninstall_commands() {
    local commands; commands=()
    _describe -t commands 'rustup uninstall commands' commands "$@"
}
(( $+functions[_rustup__help__override__unset_commands] )) ||
_rustup__help__override__unset_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help override unset commands' commands "$@"
}
(( $+functions[_rustup__override__help__unset_commands] )) ||
_rustup__override__help__unset_commands() {
    local commands; commands=()
    _describe -t commands 'rustup override help unset commands' commands "$@"
}
(( $+functions[_rustup__override__unset_commands] )) ||
_rustup__override__unset_commands() {
    local commands; commands=()
    _describe -t commands 'rustup override unset commands' commands "$@"
}
(( $+functions[_rustup__help__self__update_commands] )) ||
_rustup__help__self__update_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help self update commands' commands "$@"
}
(( $+functions[_rustup__help__update_commands] )) ||
_rustup__help__update_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help update commands' commands "$@"
}
(( $+functions[_rustup__self__help__update_commands] )) ||
_rustup__self__help__update_commands() {
    local commands; commands=()
    _describe -t commands 'rustup self help update commands' commands "$@"
}
(( $+functions[_rustup__self__update_commands] )) ||
_rustup__self__update_commands() {
    local commands; commands=()
    _describe -t commands 'rustup self update commands' commands "$@"
}
(( $+functions[_rustup__update_commands] )) ||
_rustup__update_commands() {
    local commands; commands=()
    _describe -t commands 'rustup update commands' commands "$@"
}
(( $+functions[_rustup__help__self__upgrade-data_commands] )) ||
_rustup__help__self__upgrade-data_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help self upgrade-data commands' commands "$@"
}
(( $+functions[_rustup__self__help__upgrade-data_commands] )) ||
_rustup__self__help__upgrade-data_commands() {
    local commands; commands=()
    _describe -t commands 'rustup self help upgrade-data commands' commands "$@"
}
(( $+functions[_rustup__self__upgrade-data_commands] )) ||
_rustup__self__upgrade-data_commands() {
    local commands; commands=()
    _describe -t commands 'rustup self upgrade-data commands' commands "$@"
}
(( $+functions[_rustup__help__which_commands] )) ||
_rustup__help__which_commands() {
    local commands; commands=()
    _describe -t commands 'rustup help which commands' commands "$@"
}
(( $+functions[_rustup__which_commands] )) ||
_rustup__which_commands() {
    local commands; commands=()
    _describe -t commands 'rustup which commands' commands "$@"
}

if [ "$funcstack[1]" = "_rustup" ]; then
    _rustup "$@"
else
    compdef _rustup rustup
fi
